|
Dyna-Pulse™ is a Pulsed Magnetic Field Therapy that reduces pain and stimulates bone fusion. Dyna-Pulse employs carefully formulated magnetic flux bursts to effect Calcium ions in bone and blood tissue. By restarting cellular respiration after an injury, Dyna-Pulse™ reduces swelling in the injured tissues, reduces pressure on local pain nerve tissue, and thus relieves pain without the use of drugs (see more in the Technology Section). Additionally, our technology enhances the bonding of Calcium in the bone, stalling osteoporosis. Readily affordable, and easy to use, there are configurations priced from only $495 to $895. For more information, or to order, go to our Order or Contact Page. |
||
|
Products |
||
|
6C- Cuff Emitter For Limbs and Joints The 6C is a Relief Technology innovation. This 6 inch cuff C-Series is a flexible cylinder coil designed using principles discovered by pioneering physicist Hermann Von Helmholtz. The coil is encased in bonded Nytril, a FDA Grade Medical Rubber and is formed on a flexible Lexan frame using silver plated copper wire coated in a Teflon like material call Kynar. The C-Series Emitter technology immerses your limb joints, tissues, and blood flows in a smooth homogeneous Magnetic Flux Filed rather than trying to beam through the joint from the side. Your limb is actually inside the field for total and uniform therapeutic action. |
||
|
|
|
|
|
|
8R- Flat Disk Emitter For Flat / Odd Body Areas The 8R Emitter is a Relief Technology innovation. This 8 inch round R-Series is a flexible flat coil designed using principles discovered by Nichola Tesla. The coil is encased in bonded Nytril, a FDA Grade Medical Rubber and is formed on a flexible Lexan frame using silver plated copper wire coated in a Teflon-like material call Kynar.
The R-Series is significant improvement over the standard ‘solenoid’ coil winding techniques, which while inexpensive to manufacture, produces an intense and focused magnetic field that is less than optimal for the blood and tissues in your body. Remember, the goal here is to deliver a smooth magnetic field to massage ions in the blood, not to beam yourself into the next county! The R-Series Relief Technology Emitter design creates a broad flat field spreading Magnetic Flux over a large area with a minimal magnetic gradient in that applied area. |
|
|
|
|
|
|
|
Model 50 Pulse Generator
The Model 50 is Austin Medical Research’s basic Electronic Pulse Generator based on Dyna-Pulse™ Technology. It is specifically optimized to drive any of the R or C Series Emitters to provide effective Pulsed Electro-Magnetic Flux Therapy. The Model 50 employs the highly efficient Dyna-Pulse Analog Emitter Driver as well as Performance Monitoring technology. The Model 50 is intended as both a pain therapy ‘maintenance’ and a generalized Sleep Enhancement Pulse Generator offering separate optimized Pulse Formulations for each task. Both the Model 50 Pain and Sleep Formulations are based on the standardized model of the Austin Medical Research Calcium Ion Stern Layer Resonance Model. The Model 50 operates in a closed loop feedback configuration where information about what is going on inside the Emitter is fed back to the microprocessor. This data is used to determine the nature of the pulse sent to the Emitter to get the desired results.
The Model 50 has been packaged in a robust break resistant plastic case. All the weight-producing power supply ‘iron’ is embedded in the wall type power supply. Dyna-Pulse™ digital and analog engineering combined with microprocessor control has increased the efficiencies of the Analog Power Converter to reduce weight and heat in the Model 50 making it easy and safe to use. |
|
|
|
|
|
|
|
Model 100 Professional Pulse Generator The Model 50 on Steroids! The Model 100 is Relief Technology’s advanced Consumer Electronic Pulse Generator based on Dyna-Pulse™ Technology. The Model 100 incorporates all the features and technologies of the Model 50. It also includes the ability to personalize the pulses and manage the therapy session and thus tailor the Dyna-Pulse™ Therapy specifically to you.
The Model 100 offers 20 unique Pulse Formulations, control of session timing, and a sweep function that changes the Formulations as the session progresses. The Model 100 is designed for those who want to get the most out of their therapy investment in the easiest and simplest way.
•Adjustable Session Length Timing from 10 minutes to 8 hours with an automatic shut- down at the end of the session. A simple bar-graph display shows you the relative time remaining in the session.
• Choice of 20 unique Austin Medical Research Formulated Pulses optimized for a wide range of therapies.
•‘ Sweep’ function that lets you simply program the range of Formulations you want activated during the length of the session. Either increasing or decreasing Formulation rates and modes during the session sweep the resonance range of your choice offering personalized ionic tuning to deal with the Stern Layer Phenomena in your blood. |
|
|
|
||